When you configure OSPFv3 on an interface, you must also include the family inet6 statement at the [edit interfaces interface-name unit logical-unit-number] hierarchy level.

OSPFv3 does not support routing instances or authentication. It also only supports the no-forwarding and vrf routing instance types.

At least one router on each logical link must be eligible to be the designated router for OSPFv3. For OSPFv3, one OSPF-specific interface must be created per interface name configured under OSPFv3. OSPFv3 does not allow interfaces to be configured by IP address.

Traffic engineering is not supported for OSPFv3.