Clear commands:

clear ipv6 mobile binding [home-address <prefix>
                                               | care-of-address <prefix>
                                               | interface <int>]

Clears all bindings with the mobile nodes which match the parameters. The parameter can be a prefix for the Care-of-Address or the Home-Address so that entire networks can be cleared. Use /128 to clear an individual node. The interface parameter will clear all bindings on the specified interface.

Note that when this command is used to delete bindings, the mobile node will not be informed that its home agent is no longer acting on its behalf.

clear ipv6 mobile home-agents [<interface>]

Clears the Home Agents List on the specified interface. The list will subsequently be reconstructed from received Router Advertisements.

clear ipv6 mobile traffic

Clears the statistics about the received binding updates and transmitted binding acknowledgements.

Debug commands:

[un]debug ipv6 nd

Existing command; output modified to include relevant home agent data.

[un]debug ipv6 mobile bindings-cache

Enables debugging of the bindings cache. Currently this only displays “SHUTDOWN” when the bindings cache is shutdown.

[un]debug ipv6 mobile forwarding

Enables debugging of soft tunnel forwarding.

[un]debug ipv6 mobile home-agent

Enables Home Agent debugging.

[un]debug ipv6 mobile registrations

Enables debugging of registrations, i.e. binding updates and binding acknowledgements.

[un]debug ipv6 mobile correspondent-node

Enables Correspondent Node debugging. This currently displays when a Home Address Options has been received.